انتقل إلى معلومات المنتج
FNIRSI DSO-TC4 3in1 Digital Oscilloscope Transistor Tester Signal Generator 10MHz 48Ms/s Automative Ocsillscope LCR Tester
LD 500.000
Details
The Fnirsi DSO-TC4 is both a multitester, digital oscilloscope and signal generator. The multitester features an electronic component tester, voltage test, temperature and humidity measurement and infrared decoding. Though DSO-TC4 is small and easy to carry and can be used for several measurements, The device is not extremely accurate, and therefore not meant for precise measurements. If you need a versatile tool where precision is not required, this is the right product for your home lab. The DSO-TC4 has a built-in battery of 1500mAh that can be charged with a USB-C charger. Also, this multitester has an MCX connector and a 2.8" TFT colour display. Finally, the DSO-TC4 can easily share measurements, screenshots and its screen when connected to a PC via a USB-C cable.
Oscilloscope
The oscilloscope has a real-time sample frequency of 48MSa/s and a bandwidth of 10MHz. It has a test voltage range of 400V AC/DC though it is recommended to only measure up to 40V AC/DC, and not to connect it to a wall socket. The measured waveform can be displayed on the 2.8" screen without adjustments.
Multitester & signal generator
The multitester can test many different components, such as resistors, capacitors, coils and transistors. The signal generator has 13 different major waveforms, such as square wave, triangle wave, pulse wave, sine wave, ramp wave and DC. The DSO-TC4 has an adjustable output frequency of 0-50kHz and an adjustable voltage of 3.0V.
Specifications
| Bandwidth | 10 MHz |
| Channels | 1 |
| Sample rate | 48 MSa/s |
| Voltage range | 0 V - 400 V (recommended 0 V - 40 V) |
| Vertical scale | 10 mV/div - 10 V/div |
| Horizontal scale | 50 ns/div - 20 s/div |
| Trigger mode | Auto / Normal / Single |
| Resistance | 0.01 Ω - 50 MΩ |
| Capacitance | 25 pF - 1000 μF |
| Inductance | 10 μH - 1000 μH |
| Power supply | Battery: 3.7 V, 1500 mAh DC input 5 V, 1 A |
| Display | 2.8" TFT colour |
| Dimensions | 90 x 142 x 27.5 mm |
| Weight | 186 g |
Accessories
- 1x P6100 oscilloscope probe
- 1x Alligatorclip
- 3x testclamps
- 1x USB-C cable
اكسب نقاطًا
