Soldering paste Flux 50g/80g/150g فلكس مساعد لحام

Soldering paste Flux 50g/80g/150g فلكس مساعد لحام is a ready-to-use flux paste formulated to improve solder flow, wetting and joint formation on a variety of metal surfaces. Supplied in convenient 50g, 80g and 150g containers, this flux paste is intended for hand soldering, rework, repair and precision electronics assembly where controlled flux application is required. Key features include enhanced solderability for tin-lead and lead-free alloys, reduced surface oxidation during heating, and consistent application without excessive residue. The paste’s consistency allows for accurate placement on pads, component leads and small joints, minimizing waste and helping to achieve reliable electrical and mechanical connections. Application is simple: apply a small amount of paste to the soldering area, heat with a soldering iron or rework tool to activate the flux, and introduce solder to form a clean joint. After soldering, remove any flux residues if required by the assembly process or cleanliness standards; compatibility with common cleaning methods should be verified for your workflow. Store the product in a cool, dry place and keep containers tightly closed when not in use. Follow standard safety practices for soldering operations: use adequate ventilation, avoid prolonged skin contact, and consult the product’s safety data sheet for detailed handling and disposal instructions. This flux paste is offered in multiple sizes to suit both small-scale repairs and higher-volume work without compromising control or performance.